Essential details
Shipping:Express Delivery
Product Introduction
Model:JN-3003/4003/5003/8003-DS
Shear length:200mm-5000mm
Shearing accuracy:+0.2mm
Shear angle: less than 0.025 degrees
Cutting burr: less than 0.02mm
Shearing speed:30-60 slices per minute
Shear length:200mm-5000mm
Shearing accuracy:+0.2mm
Shear angle: less than 0.025 degrees
Cutting burr: less than 0.02mm
Shearing speed:30-60 slices per minute
Uses and characteristics:
The equipment is mainly used for shearing silicon steel sheets, and is a special numerical control equipment for producing power transformers and reactor
cores.It can automatically cut the sillcon steel sheets into various types that conform to the requirements of the drawings.such as straight
Angles, angles, angles, angles. punches, punches, V. and various stepping functions.
Features:1.this equipment can complete stack iron type full automatic production of iron chips and miter joints of various type of film.
2.cutting power: imported servo motor control technology, speed, noise, long life.
3. faeding power: using large torque synchronous servo motor, with fast response, high positioning accuracy, low noise, small brake heat loss, long life.
4. track positioning: the use of stepper motor drag ball screw,linear guide.Central positioning. positioning fast, accurate, convenient, automatic memory track
width.
5. motion control; the use of advanced PLC controller, touch screen operation.simple and convenient.
6.. the material way, the use of conveyor belt to the sub district, touch sensor, signal sent by the sensor, pneumatic manipulator through servo power, the
delivery of the finished material about and separate, and tidy material
7. life guarantee: This equipment standard (linear guide, ball screw, all kinds of bearings) are all imported high-quality accessories, parts processing and
Place the charging stand.
assembly precision so high, the maximum can prolong the service life of equipment.
The equipment is mainly used for shearing silicon steel sheets, and is a special numerical control equipment for producing power transformers and reactor
cores.It can automatically cut the sillcon steel sheets into various types that conform to the requirements of the drawings.such as straight
Angles, angles, angles, angles. punches, punches, V. and various stepping functions.
Features:1.this equipment can complete stack iron type full automatic production of iron chips and miter joints of various type of film.
2.cutting power: imported servo motor control technology, speed, noise, long life.
3. faeding power: using large torque synchronous servo motor, with fast response, high positioning accuracy, low noise, small brake heat loss, long life.
4. track positioning: the use of stepper motor drag ball screw,linear guide.Central positioning. positioning fast, accurate, convenient, automatic memory track
width.
5. motion control; the use of advanced PLC controller, touch screen operation.simple and convenient.
6.. the material way, the use of conveyor belt to the sub district, touch sensor, signal sent by the sensor, pneumatic manipulator through servo power, the
delivery of the finished material about and separate, and tidy material
7. life guarantee: This equipment standard (linear guide, ball screw, all kinds of bearings) are all imported high-quality accessories, parts processing and
Place the charging stand.
assembly precision so high, the maximum can prolong the service life of equipment.